If you are someone who manages a commercial property, strata, or simply own home with electric residential gates Perth, this blog will be of immense help to you. Here we have predicted some of the most common causes for gate malfunctions in 2021. This might eventually help in saving thousands of dollars in repairs in the future.
Given below are some of the most common issues which might very well stop your electric gate from functioning the way it should. Knowing precisely what is wrong with your gate might come in handy when you decide to call a tradesperson for repairs. It can also help you in keeping your electric gate in peak working condition.
Feature or retaining walls can be a substantial contributing factor in the malfunctioning of automatic commercial or residential gates Perth, especially where the post is attached to the wall or flanking it.
After a certain period, brick piers might become so weak that they may require serious remedial work. If not identified in time, these can pose a threat and can potentially injure someone if they collapse due to neglect or under pressure.
INCORRECT INSTALLATION OF HINGE
Even though there are many top-notch gates for sale Perth, the best products can malfunction due to the incorrect installation of hinges. When installed incorrectly, the hinges might compensate, which in turn can damage the posts and/or piers. This can also lead to gearbox damages to motors.
PAINT AND RUST ISSUES
If the correct treatment to the steelwork is not done during the manufacturing process before powder coating, problems with flaking of paint and rust will arise within a few months of installing electric commercial or residential gates Perth.
UNENGAGING ELECTRIC LOCK
There can be many reasons as to why an electric lock might become unengaging in electric gates Perth. However, the most common cause is a twisted or sagging gate, which leads to disconnection with the catch.
INCORRECTLY INSTALLED TRACKS
Telescopic gates for sale Perth can begin malfunctioning if not correctly installed. This happens when the gate tracks are not installed properly. Close attention needs to be paid to their installation, or the telescopic mechanism might create friction issues.
SLIDING MECHANISM AFFECTED BY POWDER COATING
This happens most with the telescopic gates. This is why powder coating is not recommended on the mechanism, as it will create problems with the smooth operation of the telescopic gate.
ELECTRIC LOCKS THAT ARE INCORRECTLY FITTED
It might sound hard to believe, but there are cases where the electric lock has been found to be installed on the wrong gate leaf. Although contractors do this at the request of a client, it might result in the gate not functioning at its optimum level.
INSTALLATION OF GUIDEPOST
Incorrect installation of a guidepost can be one of the causes for the problems experienced with telescopic mechanisms for automated commercial or residential gates Perth. If it is off-center, it might break the cable and collapse the telescopic wheels. This might lead to costly breakdown call-outs and repairs.
It is essential to know how your gates should operate and what might be the problem. This can assist in identifying any issues earlier, thus helping avoid any downtime and costly repairs in the future. Hopefully, this blog will help you know what you should be looking for, thereby keeping you ahead of the curve.